مشخصات کامل
 
Product SKUs
MBD-X9DR7-TF+ -O
  • X9DR7-TF+ (Standard Retail Pack)
MBD-X9DR7-TF+ -B
  • X9DR7-TF+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced E-ATX
Dimensions
  • 13.68" x 13" (34.7cm x 33cm)
 
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600 
        and E5-2600 v2 family 
        (up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM slots
  • Up to 1.5TB DDR3 ECC LRDIMM
  • Up to 768GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 from LSI 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices as default, more HDD devices support is also available as an option *

    * For special sku, please contact your Supermicro Sales.
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O
  • Nuvoton W83527HG
 
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total
    (4 rear + 4 via header + 1 Type A)
Video
  • 1 VGA port
Keyboard/Mouse
  • PS/2 Keyboard/Mouse port
Serial Port / Header
  • 2 Fast UART 16550 ports: 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Chassis (Optimized for X9DR7-TF+ )
2U Chassis
  • CSE-826BA-R1K28LPB
  • CSE-826BA-R920LPB
  • CSE-826BE16-R1K28LPB
  • CSE-826BE16-R920LPB
  • CSE-826BE26-R1K28LPB
  • CSE-826BE26-R920LPB
  • CSE-828TQ-R1K43LPB
3U Chassis
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
 
SuperServer(s) with X9DR7-TF+
Model(s)

 
Expansion Slots
PCI-Express
  • 2 (x16) PCI-E 3.0 slots
  • 4 (x8) PCI-E 3.0 slots

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Main Switch Override Mechanism
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 9x 4-pin fan headers (up to 9 fans)
  • 9x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range